IPS panel locks for simple access and confident securing.

Open every locking point on an IPS panel with one key. Secure the panel firmly and check each lock’s position when the work is complete.

Contour Secure’s tamper-resistant IPS panel locks combine a removable key, visual position indicators and compression that clamps the panel against its frame.

Discuss your IPS panel requirements

Accessing one panel should not require a handful of keys.

Your team needs to inspect the plumbing, investigate a leak or maintain the services behind an IPS panel.

Before work can begin, several locking points need opening.

With retained-key locks, each key stays in its lock while unlocked. That gives staff a cue that the locking process is incomplete, but it can also mean needing several keys to open one panel.

Your team needs straightforward access and a clear way to check that every lock has been secured afterwards.

Keep the reassurance. Simplify the access.

When each unlocked fixing holds its key, having the correct key is only part of the challenge. Your team also needs enough copies to release the whole panel.

A missing spare can mean finding a colleague or returning to the workshop before maintenance begins.

Contour Secure’s key can be removed in both the locked and unlocked positions. Staff can unlock each fixing in turn using one key, while visual indicators provide a reference for checking the lock position after closing.

Your team can access the services without gathering a separate key for every locking point.

Close-up of the Contour Secure lock face

One key to open it. A clear check when you close it.

 

Picture your team arriving at an IPS panel with the key they need.

They unlock the first fixing, remove the key and move to the next. Once all locking points are released, they open the panel and get on with the work.

Afterwards, they return the panel to position and secure each lock. The compression action draws the panel firmly against its frame, and staff check that the two red indicators align at each locking point.

  • Fewer keys to handle.
  • A firm closure.
  • A familiar checking process before leaving the area.

How the IPS panel lock supports your team.

Removable keys for straightforward access.

The key is released in both the locked and unlocked positions, allowing staff to operate each compatible lock on the panel in sequence.

There is no need to leave a separate key in every unlocked fixing.

Visual indicators for checking lock position.

Key removal alone does not indicate whether the lock is secured.

Instead, staff check the markings on the lock face. Aligning the two red indicators shows the locked position, providing a visible reference as part of the final securing process.

Compression that clamps the panel shut.

The cam engages behind the IPS framework, then the compression mechanism draws the access panel firmly against its frame.

This action helps take up fitting clearance at the locking point, reducing unwanted movement and gaps caused by a loose closure.

A flush face with fewer opportunities for interference.

The low-profile lock face sits flush with the panel surface, reducing protruding features and supporting a smooth, easy-to-clean finish.

Its tamper-resistant design helps restrict operation to staff with the appropriate key.

Get the right fit for your IPS system.

A secure closure depends on the panel, supporting framework and lock working together.

Contour Secure helps you assess the aperture, clearances, cam engagement and configuration needed for your installation. Sample testing allows the proposed fit and operation to be checked before wider supply.

Good to know

Compression addresses clearance at the locking point. The panel and frame must also fit correctly to achieve the intended overall closure.

Three steps to simpler IPS panel access.

Step 1

Show us the panel.

Share photographs of your existing IPS panels and locks, or drawings for a new system.

Tell us how many locking points each panel has, how staff currently gain access and what you want to improve.

Step 2

Assess and test the arrangement.

We review the installation requirements and identify a suitable configuration, using surveys, drawings and samples as required.

Check how the key releases, how the indicators show lock position and how firmly the panel closes.

Step 3

Put the agreed locks into use.

Once approved, we supply the locks for the agreed scope and support the relevant retrofit or manufacturer integration process.

Discuss your IPS panel requirements

Improve existing panels or specify locks for new ones.

Keep suitable IPS panels in service.

Where the panels and framework remain suitable, replacing the locks may simplify access and improve the closure without replacing the complete IPS installation.

Explore retrofit options

Build straightforward access into a new IPS system.

For new installations, we work with the manufacturer to agree the lock sizing, orientation and configuration before integration.

Explore specification support
Contour Secure tamper-resistant cam lock

Damaged lock. Serviceable IPS panel.

If a lock has been damaged but the panel remains in good condition, a compatible replacement lock can provide a straightforward repair, restoring secure closure while keeping the existing panel in place.

Reach the services. Complete the work. Check the locks.

Give your team a straightforward way to open an IPS panel and a clear process for checking each locking point afterwards.

Show us your existing installation or proposed design. We will help you assess a locking arrangement that combines simple authorised access, firm compression and visible lock-position indicators.

Discuss your IPS panel requirements View lock details and technical information

Call 01952 890158 or email sales@contoursecure.co.uk.